S-beam Force Sensors
The binocular bending beam, or S-beam construction has good moment immunity that results in very accurate output. S-beam Force Sensors can both measure compression and tension forces.
FN3030 S-beam Force Sensor
Well suited for customization
Measurement Range
50N - 100kN
Accuracy [%]
±0.1% of F.S.
Output
mV/V
0,5 - 4,5V
Analog (0-10V/4-20mA)
0,5 - 4,5V
Analog (0-10V/4-20mA)
Load direction
Compression
Tension
Tension
FN3060 S-beam Force Sensor
Highly suited for use in test benches and fatigue tests
Measurement Range
250N - 2,5kN
Accuracy [%]
±0.1% of F.S.
Output
mV/V
0,5 - 4,5V
Analog (0-10V/4-20mA)
0,5 - 4,5V
Analog (0-10V/4-20mA)
Load direction
Compression
Tension
Tension
FN3148 S-beam Force Sensor
Integrated mechanical stops
Measurement Range
10N - 2kN
Accuracy [%]
±0.05% of F.S.
Output
mV/V
0,5 - 4,5V
Analog (0-10V/4-20mA)
0,5 - 4,5V
Analog (0-10V/4-20mA)
Load direction
Compression
Tension
Tension
FN3280 S-beam Force Sensor
Designed to measure low force
Measurement Range
1N - 5N
Accuracy [%]
±0.1% of F.S.
Output
mV/V
Load direction
Compression
Tension
Tension
FN7110 S-beam Force Sensor
High accuracy measurement channels in two ranges in the same loadcell
Measurement Range
10N - 10kN
Accuracy [%]
±0.1% of F.S.
Output
mV/V
0,5 - 4,5V
Analog (0-10V/4-20mA)
0,5 - 4,5V
Analog (0-10V/4-20mA)
Load direction
Compression
Tension
Tension
FN9620 S-beam Force Sensor
IP68-1m water column
Measurement Range
500N - 10kN
Accuracy [%]
±0.05% of F.S.
Output
mV/V
Load direction
Compression
Tension
Tension
